SBS modified asphalt waterproof coiled material

SBS modified asphalt waterproof coiled material based on SBS modified asphalt rubber led invasion stains covering layer, with polyester fiber non-woven fabrics, yellow linen cloth, glass fiber mat production for tire respectively, such as plastic film as anti-sticking isolation layer, the materials, ingredients, eutectic, invade stains, composite forming and curl processing and production.

Characteristics: good extension performance, long service life, convenient construction, low pollution, etc.

Scope of application: widely used in industrial and civil architecture roofing, basement, toilet waterproof project and the roof garden, roads, Bridges, tunnels, parking lot, swimming pools and other projects of waterproof. Deformation of a larger project proposal chooses extension performance of polyester products, other appropriate chooses relatively economic fiberglass tire building products.

Method:

Before construction should clean up the defect at the grass-roots level, the moisture content is not greater than 9%, besmear brushs special base oil and fully dry before construction. Specific engineering construction and detail structure should be in accordance with the engineering of waterproof design, acceptance criteria and construction specifications.

Low at the grass-roots level of dry, level off, clean, no dust, without sundry, no pollution, no moss spot, such as hole, hole, crack to be filled with cement mortar, hew highlights.

Low to the wind brushing treatment agent at the grass-roots level.

Low surface and surface coating adhesive at the grassroots level, and obligate lap to besmear brushs joint glue.

The shop is stuck coil, and exhaust, and compaction.

Low on lap seam of paste.

Storage transportation:

1. Avoid or stored in dry and ventilated environment. Storage temperature shall not be lower than the corresponding specification product compliance test temperature (℃), should not be above 50 ℃. Vertical storage, height is not more than two layers;

2. Shipment must be made to put, height is not more than two layers, to prevent the tilt or horizontal pressure, if necessary the tarpaulin.

3. Under normal conditions of storage and transportation, storage period from the date of production for one year